Model/Brand/Package
Category/Description
Inventory
Price
Data
-
Category: resistanceDescription: VISHAY SH2522R00JS03 Through hole resistor, SH series, 22 ohm, 25 W, ± 5%, 550 V8429
-
Category: resistanceDescription: Res Metal Film 4.75Ω 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R3103
-
Category: resistanceDescription: Res Metal Film 619KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R3729
-
Category: resistanceDescription: Res Metal Film 7.68KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R7023
-
Category: resistanceDescription: Res Metal Film 4.99KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R1010
-
Category: resistanceDescription: Res Metal Film 7.5KΩ 5% 0.5W(1/2W) ±100ppm/℃ Conformal Axial Thru-Hole T/R9513
-
Category: resistanceDescription: Res Metal Film 464Ω 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R7895
-
Category: resistanceDescription: Res Metal Film 3.92M Ohm 1% 0.5W(1/2W) ±250ppm/℃ Conformal AXL Thru-Hole T/R5993
-
Category: resistanceDescription: Res Metal Film 4.53KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R9045
-
Category: resistanceDescription: Res Metal Film 392Ω 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R3495
-
Category: resistanceDescription: Res Metal Film 360KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R6071
-
Category: resistanceDescription: Res Metal Film 390Ω 5% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R8080
-
Category: resistanceDescription: Res Metal Film 3.83Ω 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R4724
-
Category: resistanceDescription: Res Metal Film 35.7KΩ 1% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole T/R6622
-
Category: resistanceDescription: Res Metal Film 360Ω 5% 0.5W(1/2W) ±100ppm/℃ Conformal AXL Thru-Hole Ammo Pack2474
-
Category: resistanceDescription: RWM 6x22 Series 7W, axial enameled wire wound power resistor, rated power at 70 ° C for axial lead, power at 6W -------25 ° C, 7W resistance tolerance, ± 5% temperature coefficient,+75ppm/° C (typical value) limit element voltage, 350V temperature cycle, -55 ° C?+200 ° C body length, 18 mm body diameter, 6.5 mm lead length, 25 mm (minimum value) lead diameter, 0.8 mm3851
-
Category: resistanceDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.2067
-
Category: resistanceDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.8839
